Do you want leap further? Now You can, for zombies are one special ability "Leap". It's now possible to upgrade your current leap to more stronger force, meanwhile it's possible upgrade to 1st level...
Download
Download
mmtimer - plugin for metamod, increases FPS server.
General information
The plugin works in three directions:
increases the accuracy of OS timer (only under Windows)
reduces the time "sleep" process HLDS
removes the limitation of 1000 FPS, built in HLDS
So there is "Insane mode" (controlled quartz mm_insane 0 / 1), activating mode,
where the HLDS download CPU at 100%, giving the maximum possible FPS
Technical Implementation: Patching process memory HLDS
Supported builds: Presumably all under Linux and Windows
Installation
You can get it here: Attachment and then
It is understood that metamod is installed in a standard directory <gamedir> / addons / metamod
Create a directory <gamedir> / addons / mmtimer
copy the contents of the bin folder from the archive
in <gamedir> / addons / metamod / plugins.ini add dates
Code:
Code: Select all | Line number On/Off | Expand/Contract
win32 addons \ mmtimer \ mmtimer.dll
linux addons/mmtimer/mmtimer_i386.so
start the server, check the plug-command meta list, the status should be "RUN":
Code:
Code: Select all | Line number On/Off | Expand/Contract
[3] mmtimer RUN - mmtimer_i386.so v1.6 ini ANY Never
the Linux server to run with 3-pingboost
Setting
Desired FPS set kvar sys_ticrate
To turn on insane mode, set kvar mm_insane in 1 or 2 (do not forget the increase sys_ticrate)
HowTo:
If you have Win server and conventional means you can not get more than 512 FPS, then you will set mm_insane 0 and sys_ticrate 1100. After this FPS should be a 1024 without a high load on the CPU.
If you have Win server that already has 1000 FPS and you do not want more, then this plugin is useless
If you have a Linux server, you can increase sys_ticrate above 1000 when mm_insane 0 - on some systems, you get over 1000 FPS without a strong load on the CPU.
If you want more than 1000 (1024) FPS, then put mm_insane 1 and increase sys_ticrate to the desired value. Only in a regime mm_insane have to pay a high CPU usage.
Screenshots
Problems with "512 FPS instead of 1000" there are no more: smile:
Windows, Insane mode:
Linux, Insane mode:
Download
The plugin works in three directions:
increases the accuracy of OS timer (only under Windows)
reduces the time "sleep" process HLDS
removes the limitation of 1000 FPS, built in HLDS
So there is "Insane mode" (controlled quartz mm_insane 0 / 1), activating mode,
where the HLDS download CPU at 100%, giving the maximum possible FPS
Technical Implementation: Patching process memory HLDS
Supported builds: Presumably all under Linux and Windows
Installation
You can get it here: Attachment and then
It is understood that metamod is installed in a standard directory <gamedir> / addons / metamod
Create a directory <gamedir> / addons / mmtimer
copy the contents of the bin folder from the archive
in <gamedir> / addons / metamod / plugins.ini add dates
Code:
Code: Select all | Line number On/Off | Expand/Contract
win32 addons \ mmtimer \ mmtimer.dll
linux addons/mmtimer/mmtimer_i386.so
start the server, check the plug-command meta list, the status should be "RUN":
Code:
Code: Select all | Line number On/Off | Expand/Contract
[3] mmtimer RUN - mmtimer_i386.so v1.6 ini ANY Never
the Linux server to run with 3-pingboost
Setting
Desired FPS set kvar sys_ticrate
To turn on insane mode, set kvar mm_insane in 1 or 2 (do not forget the increase sys_ticrate)
HowTo:
If you have Win server and conventional means you can not get more than 512 FPS, then you will set mm_insane 0 and sys_ticrate 1100. After this FPS should be a 1024 without a high load on the CPU.
If you have Win server that already has 1000 FPS and you do not want more, then this plugin is useless
If you have a Linux server, you can increase sys_ticrate above 1000 when mm_insane 0 - on some systems, you get over 1000 FPS without a strong load on the CPU.
If you want more than 1000 (1024) FPS, then put mm_insane 1 and increase sys_ticrate to the desired value. Only in a regime mm_insane have to pay a high CPU usage.
Screenshots
Problems with "512 FPS instead of 1000" there are no more: smile:
Windows, Insane mode:
Linux, Insane mode:
Download
Counter Strike 1.6 dedicated server installation on Windows XP tutorial
In order to install a Counter Strike 1. 6 dedicated server, you need :
a.Windows XP, processor 1000 ghz, memory 256 ram
b. Connexion to internet
c. 300 - 400 MB free space on disk
a.Windows XP, processor 1000 ghz, memory 256 ram
b. Connexion to internet
c. 300 - 400 MB free space on disk
You shall have to follow a few steps :
1. Connect to the internet
2. Download here or here to download the CS 1.6 Server Creator installer and unzipp it anywhere on disk.
3. Create an new directory on your disk and name it HLDS . It can be named anyhow but we shall use HLDS because it`s classic .
4. Now doubleclick on installer.exe and when the selection window appeares you select the new directory HLDS . Hit OK and wait a few moments . A blue window will appear on screen displaying the scroll of the installation . At this point the installer downloads and installs all the server`s components in your HLDS directory. It can take some time to do it, depending on the internet connection , so have a little pacience .When the installer finishes his work , check out the HLDS directory and see if it has approximativly 315 MB .If it has , then everything it`s ok and if it hasn`t 315 MB you`ll have to repeat this step .Open the HLDS directory ; it should look like this :
1. Connect to the internet
2. Download here or here to download the CS 1.6 Server Creator installer and unzipp it anywhere on disk.
3. Create an new directory on your disk and name it HLDS . It can be named anyhow but we shall use HLDS because it`s classic .
4. Now doubleclick on installer.exe and when the selection window appeares you select the new directory HLDS . Hit OK and wait a few moments . A blue window will appear on screen displaying the scroll of the installation . At this point the installer downloads and installs all the server`s components in your HLDS directory. It can take some time to do it, depending on the internet connection , so have a little pacience .When the installer finishes his work , check out the HLDS directory and see if it has approximativly 315 MB .If it has , then everything it`s ok and if it hasn`t 315 MB you`ll have to repeat this step .Open the HLDS directory ; it should look like this :
Now open the cstrike folder , that should look like this :
5. Next step is to set the server up for accepting non steam clients . In order to do that download you can use one ofe these methods:
5.1 Rcommended - Use Dual protocol method (47+48). Download Dproto (latest version here),or here double click it and choose as installation folder, the main directory of your server (HLDS). Then go to HLDS\cstrike\addons\metamod, open plugins.ini and edit this line there: